Zetris
Zetris Quickstart
- Load the ZPUino Soft Processor with HQVGA to the Papilio One 500K. You might want to write the processor to SPI Flash so it is stored permanently and starts up when power is applied.
- Download the ZPUino IDE.
- Download the Zetris sketch. Zetris Zip or Zetris Source Code on Github
- Load the Zetris sketch in the ZPUino IDE and then set the board type to the ZPUino with HQVGA and the serial port to the second serial port of the Papilio.
- Upload the sketch to the Papilio and you should see Zetris!